Package interface

Choose the package interface before choosing the filling head.

BIB, BID, and bulk bin formats are not interchangeable volume labels. Each combines a bag, fitment, cap, outer container, handling method, sterilization evidence, and release check.

Aseptic Bag-in-Drum Filling Machines

For bulk food ingredients, the filling head, aseptic liner and drum handling must work as one cell. Start with the actual drum and bag, then choose the head arrangement.

Package requirements & selection ↗

Aseptic Bag-in-Box Filling Machines

Smaller packages change the work cycle. Match the aseptic bag interface to bag support, box insertion and downstream packing before selecting the filling configuration.

Package requirements & selection ↗

Aseptic Bag-in-Bin & Tote Filling

Bulk bins and totes put container access and load movement at the centre of selection. Define the liner, filled mass and handling route before fixing the filling-cell layout.

Package requirements & selection ↗

Aseptic IBC Liner & Bulk Bag Filling

An IBC liner turns a rigid intermediate bulk container into a large aseptic package. The liner, fitment, support frame and filling head must be designed as one system.

Package requirements & selection ↗

THREE FAMILIES, THREE HANDLING LOGICS

Compare bag-in-box, bag-in-drum and bag-in-bin on one basis.

Read the package comparison

BIB

Foodservice, ingredients, and smaller distribution units

Bag-in-box

The bag, box, insertion method, fill head, and downstream closing sequence must be treated as one format set.

Define in the RFQ: Bag supplier, exact fitment drawing, nominal and target net fill, box dimensions, insertion method, and closure inspection.

BID

Industrial ingredients, purées, concentrates, and bulk intermediate storage

Bag-in-drum

Drum presentation, liner support, neck location, conveyor or pallet handling, and filled-drum movement affect cycle time and ergonomics.

Define in the RFQ: Drum material and dimensions, bag construction, fitment, target mass, pallet pattern, operator intervention, and transport tests.

BIN

Large bulk transfers where container logistics dominate the cell layout

Bag-in-bin / tote

Container access, liner placement, head travel, load measurement, floor loading, and safe filled-container removal need project-specific review.

Define in the RFQ: Bin geometry, liner and fitment, lifting restrictions, weighing method, floor load, clearance, traffic flow, and customer unloading method.

IBC

Bulk ingredient and export packages where the liner is supported by an IBC or frame

IBC liner / 1000–1500 L

Liner installation, fitment position, head reach, full-load weighing, container movement and cleaning access define the cell.

Define in the RFQ: IBC or frame dimensions, liner drawing, fitment and cap, target net mass, filled load, movement method, floor loading and discharge interface.

INTERFACE CHECK

A nominal bag volume is not a compatibility statement.

01 Confirm the exact fitment manufacturer, part number, geometry, cap, and tolerance drawing.

02 Confirm how the package was pre-sterilized and how each lot remains traceable.

03 Confirm the head-to-fitment mechanical interface and the method used to protect it during opening, filling, and recapping.

04 Confirm outer-container presentation, support, filled weight, movement, and transport validation.